The stator is the very important electrical part of the wind turbine. It contains all the coils of wire which will have voltage induced in them as the magnets pass over them. It’s defined as the ‘stator’ because it is the ‘stationary ‘ (it doesn’t turn ) part of the alternator. For this project you’re building a 3 phase alternator and the stator will have 9 coils. Each phase will consist of 3 coils in series and you’ll make a star connection between the phases. You’ll build this in our stator mold and the lines on the bottom of the stator mold will help to know the the coils are the correct size, and that they’re placed correctly.
PM STATOR MAKING
